Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13625870

- Product Categories
- Friendly Links
- home > Supply > High pressure centrifugal fan | Shanxi nagorye blower (certified) | Chifeng centrifugal fan
Information Name: | High pressure centrifugal fan | Shanxi nagorye blower (certified) | Chifeng centrifugal fan |
Published: | 2015-03-05 |
Validity: | 0 |
Specifications: | Limited |
Quantity: | |
Price Description: | |
Detailed Product Description: | 1. Notes centrifugal fan selection when (1) should be based on some of the key parameters to select a centrifugal fan, including the terms of the nature of gas transportation, the fan uses. (2) at the time of selection, should take into account the leakage loss calculation error and other aspects in addition to its safety factor should be taken into account, the amount of wind is 01.05-1.1, pressure is 1.1-1.15 for the best, so the fan will not damage. (3) pipe resistance characteristics and the degree of matching characteristics centrifugal fan is also very important and should be able to allow the fan to stabilize the operation. General efficiency of its design conditions shall not be less than about 90% maximum efficiency fan. (4) Select the fan should carefully compare, and to consider the long-run effects of economic, rather than a one-time investment. (5) If you use more wind turbines, you should choose the same type. When the installation specifications 1. centrifugal fan centrifugal fan installed, there should be a place and space to install the required components should be complete, can not have missed, including platform support beam ﹑ ﹑ ﹑ tripod boom and fixed bolts. 2. You must install a spring-type anti-vibration devices, rated deflection of 40mm. 3. Inter fan and duct To install flexible joints, fans at both ends should be run in parallel, if not parallel, the eccentricity can not exceed 25mm. 4. Only in the duct cleaned centrifugal fans, filters installed, bearing lubrication is good and after the end of the centrifugal fan test parameters, in order to officially start the fan. 5. When the fan during the field test, there must be beside the supervision and guidance staff, the amount of wind-site inspection in accordance with the measured value. Stand-alone operation of the test time was one hour, mainly for voltage, current, wind, air pressure, vibration and noise levels, etc. displacement test. High pressure centrifugal fan | Shanxi nagorye blower (certified) | Chifeng centrifugal fan blower provided by the Shanxi nagorye limited liability company. Shanxi nagorye Blower Co., Ltd. (www.sxgfj.cn) (www.sxfjgs.com) is an industry leader in Shanxi Xinzhou, fans, ventilation equipment, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, the maximum limits to meet customer needs. In nagorye blower leadership with the staff warmly welcome all inquiries negotiations to create nagorye blower a better future. You can also access (www.sxfjgs.com/supply_details_43473330.html), for more information about the company. |
Admin>>>
You are the 25209 visitor
Copyright © GuangDong ICP No. 10089450, Shanxi nagorye Blower Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 25209 visitor
Copyright © GuangDong ICP No. 10089450, Shanxi nagorye Blower Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility